Tag Archives: oahu


Sanding A Drywall Is Not Only A Job For The Machine! | Barker Kapelle Construction LLC

A freshly taped wall requires adequate preparation before painting. Some people think that the mere act of preparing a taped wall is actually sanding a drywall. You will be surprised that the preparation also covers the joint compound that was initially used for taping. For a fact, sanding is not much of a complex task. The only set back is that it is tiring and dusty over time. You can easily sand a taped wall. However, a little skill and care is required to make taped seams disappear under a paint coat. That means you should pay attention to the type of sandpaper used. Essentially, sandpaper should not clog during sanding.

Choosing sand-papers

Sandpapers are available in both industrial and commercial grades. You will hardly find industrial grade sandpaper in an ordinary hardware store. Typically, you will find three types of sandpapers: garnet paper (tarnish-brown), silicon-carbide paper (black wet/dry sand paper) and aluminum-oxide paper (gray). The colors make it easy to identify them. Both aluminum-oxide and garnet sandpapers are actually open-coat papers. This property makes them ideal for drywalls as they hardly clog when used. Between the two options, aluminum-oxide paper is more preferable as it wears at a slower rate and lasts longer. Its thicker substrate makes it tear-resistant.

Evaluating sandpaper grit

The sandpaper grit goes a long way to determine the effectiveness of sandpaper’s abrasive action. Therefore, sandpaper with a higher grit number will give you a finer action as compared to sandpaper with a low grit number. When you go to a hardware store or consult a general home contractor, you will find that grits below 100 are usually not ideal for use in drywalls. This also applies to grits that are above 220, as they clog easily even though they leave barely visible scratches on a drywall. Recommendable grits range from 120 to 150. They are suitable for rough-sanding drywalls.

Tools for sanding task

There are two tools that can help you to sand a drywall. Do not pay attention to the belt sander as it will not make much of a difference. Hand sanders are ideal because they have a flat pad and work effectively on walls that are accessible without a ladder. Pole sanders are ideal in cases where both the wall and ceiling are higher. You can also get drywall finishers that come with sanding sponges. Sanding sponges are easy to manipulate as compared to a hand sander.

Sanding for the best outcome

You can use a number of sanding tips to get the best outcome for your drywall. First, you need a good dust mask for health reasons. During sanding, you cannot help copious amount of fine dust that floods the air. You also need to ensure that there is proper lighting. You do not want to miss any defect before and after sanding. A work light is a perfect complement for overhead light. With these two, you can spot subtle depression, ridges and other defects that may be present. While sanding, ensure you move the light around for a better view.

Finishing a drywall takes nearly four days. The first essential step in finishing is sanding. Sanding helps prepare the drywall for paint application. Therefore, you need to be very careful during this important stage. When you sand the drywall properly, you will not have visible defects when you start painting. More often than not, when you use the right lighting option, you will be able to identify these less obvious defects that become much visible after painting. Working with general home contractors is good choice when you want to make a drywall finishing project successful.


Want To Know About A Fine Housing Solution That Is Environmentally Friendly Too?

With an increase in environmental concerns, it is no doubt that green home ideas have inevitably gained prominence. If you are more observant, you can notice significant growth in the number of green home projects. Well, many architects have now found it feasible to build green homes for both health and environment purposes. That explains a lot why there is a growth in green home projects. Moreover, homeowners actually prefer having green homes because they are energy efficient. They also boost health. If finding a perfect green home seems like an issue, these simple ideas will enlighten you more on essential features for green homes.

Universal standards

The first thing that crosses people’s mind when they hear about green homes is sustainability. People are more concerned with the upkeep of their homes. In that regard, green homes should be built in line with universal standards. It is your duty to closely scrutinize a home for reviewing purposes during its construction. Reviewing helps you to determine the building’s long-term sturdiness, sustainability and impact on the health and comfort of its occupants. A perfectly coordinated computer simulation for the entire home is among one of the essential items that home builders in Hawaii have in their priority list as it helps in the creation of a flawless green home. It is part and parcel of universal approach used in building a green home.

Air supply system

A green home should have an efficient air flow system that allows for easy penetration of air. Therefore, it is paramount to evaluate the air penetration in a green home during construction as it goes a long way to determine the kind of ventilation system that will be used. Heat gain and heat loss are two crucial factors that significantly contribute to increase in utility bills. Unfortunately, they also have a lot to do with decrease in the efficiency of a building over time. Evaluating air penetration helps you determine the presence of air leakages in the house at an early stage. Calling an energy auditor to perform tests in the house is one of the effective ways of evaluating air penetration in a green home. A green home with a reliable air sealing helps cut down energy costs and enhances home sturdiness.

Safety in home building components

Apparently, there are home building components like furnishings, paints and solvents that can easily emit pollutants in the house. This is very unhealthy especially if you are living with an asthmatic person. You need to choose home building components that have low quantity of pollutants to make the house more comfortable and healthier for everyone.

Home building components with low quantity of pollutants guarantee you less allergy cases in the house. You can talk to interior designers who specialize in home finishing to get ideas on some of the best home finishing products that are ideal for a green home. It will make things easy when looking for the perfect choice from a wide range of products.

The green home is designed to be environmentally friendly and sustainable. It enhances efficient use of energy at home making it possible to save on energy cost in the long run. It is important to protect and conserve the environment. Environmental conservation starts with where you live and by choosing to build a green home, you will be taking a great step towards environmental protection. Keep in mind that there are affordable green homes that many people get tempted to purchase. Although the price of green affordable homes may not be high, they are not recommendable as home critics argue that it is by far more expensive to build a green home as compared to a traditional home.


Questions To Ask About Interior Design For Homes In Hawaii | Barker Kapelle Construction LLC

Have you been fascinated with the many Hawaiian homes you have seen through pictures posted online or through those that you have had your eyes on when watching movies? Well, those stylish houses bring in a vibe like no other and a breath of fresh air that seems to attract you to build a home in the place as well. Before you finally decide to do so, you have to ask a few questions that are related to interior design of homes in Hawaii.

What makes Hawaii interior design entirely different from others?

As a potential homeowner in Hawaii, one of the things you will love to hear about is how unique a Hawaiian home is when compared to those in other countries. Look at Hawaii’s mesmerizing landscapes, sunny skies and blue waters. The combination of these things can be integrated very well in your Hawaiian home’s interior design. With different refreshing colors in the background, you get to enjoy a home that is truly Hawaiian-inspired. Not to forget that the place’s temperate climate outdoors that adds a boost of uniqueness to the home you are deciding to build.

Are there specific plants that can be brought indoors to a Hawaiian home?

One of the things that make a Hawaiian home standout is the inclusion of houseplants in its interiors. Most people look for bromeliads not just for the plant’s leaf variations but also for the promise of longevity even when it is placed indoors. There are those that favor those ever-captivating orchids that are available in a wide array of colors. Ti plants, another type of indoor plant, are also perfect for that empty corner in your dream Hawaiian home. Of course, you should not forget about bamboos and other fresh plants like philadendrums and raffis palms.

What makes condos in Hawaii different from other big cities in US?

When deciding to live in a condo in Honolulu and other famous places in Hawaii, your main concern will be how to make things different when compared to other big cities you may have been to. Well, you have to take note that Hawaii has its own way of adding more texture to your condo units. You can fuse in some fabric with other textural furnishing and wall paper then put the pieces together such that the finished product will look like a wall art.

Do not forget too that when you live in condos in Hawaii, you can opt for bamboo, wood or tiles for the flooring instead of just sticking to the already very passé carpet. Overall, Hawaii offers a cooler, more aesthetic feel in its condos and even in all other types of residences in the place.

Are there new design trends you can recommend?

You certainly will want the idea of having a unique home when deciding to build one in Hawaii. It is good to note that you can do that in your home’s interiors depending on what you have agreed upon with your home builder. With flooring options, for instance, you can now see vinyl and tile pieces that look like wood. You can even get them in finishes perfect to create that ambience you have always wanted for a home. Building kitchen outdoors is another new design trend for Hawaiian homes these days. This allows the home to be more functional and more accommodating for guests who might come around.

Now that some of your questions regarding Hawaii’s interior design have been answered, you are ready to head on to the next part of the task. You need not go far when looking for a reputable Kailua, Hawaii construction company – talk to us today!


How To Have A Relaxing Space In Your Hawaiian Home | Barker Kapelle Construction LLC

Hawaii is known for its laidback charm that makes it an ideal place for those who want a perfect place where they can spend time to relax and de-stress. Despite that cool definition of how it is like to live in Hawaii, you have to take note that the land is not free from stress too. With this in mind, there is one thing that you will certainly want to achieve in your Hawaiian home. That is no less than a relaxing space where you can relax after hard day’s work. How can you have one in your Hawaiian home? Here are tips to help you with.

Get rid of noise

Noise is one thing that can actually ruin your day. When you go out to the beaches of Hawaii, you can hear the waves as if calming your senses. However, when you go to other places, you will totally have problems with noise. That is normal to any place but it does not mean you can do nothing about it. The best solution to that irritant is a soothing place at home where noise is filtered. Forget about those unwanted sounds. Have a room where you can sit back and relax while listening to your favorite music. It will be good to choose sounds synonymous to raindrops or water falling from a mountain top. As an alternative to playing music, you may opt to open your windows instead. That way you will feel like you are closer to nature.

Choose the right colors

Sometimes, the colors you see in your home will affect your mood. If your workplace seems to be more on the reds and browns, you might as well create a space in your home where those reds and browns will not be seen at all. It will be perfect to look for calming, relaxing and soothing colors like greens and blues. Lavenders can also be added to the color choice. Some of you will favor yellow too and that is truly a good idea.

Make small updates to your space


For a more relaxing atmosphere in your Hawaiian home, it will be good to bring is some small pieces that will give you a warmer, nicer feeling. You can request for some flower arrangements at the nearest flower shop or you can choose to pick flowers in your garden and arrange them yourself. You can bring in more pillows into your space if you want. If you are an art-lover, a framed painting will surely be a good addition to the soothing space that you have always wanted.

Choose fabrics that are cool and soft to the touch

There are certain types of fabrics like faux and leather which can be quite rough to the touch. If you are after a soothing space, why not invest in plush pillows and blankets as well as in silky fabrics that will make you feel like cuddling up and relaxing afterwards. These soft materials can take you away from the stress of the day.

Never take your sense of smell for granted

What you smell in your space can impact your mood for the day. For a soothing space, it will be wise to have fresh fragrances from flowers in your home. You should also keep your home clean to remove any obstructive smell. You do not want dirt and filth to result to more stress when you intend to relax.

Of course, above all other things, creating a relaxing space will require the expertise of a trusted Honolulu construction company. Give us a call and let us amaze you with our house building skills!


Should You Buy Or Build A House In Hawaii? | Barker Kapelle Construction LLC

As you plan your future in Hawaii, one of the biggest concerns you will face is housing. If you are deciding whether to buy or build a home in Hawaii, it’s important to learn more about things that make this place unique, as well as ask yourself some difficult questions. Hopefully the following observations and questions help give you some perspective when making a decision.

Ask yourself a few questions first

If you are already asking yourself “Should I buy or build” a house in Hawaii, it’s clear you want to set yourself up for success. Some initial questions will help get you started on the right track. What are your options? Is a home available for sale that meets your needs? Is an undeveloped plot of land available? Can you remodel an existing home? Would adding an addition or ADU accommodate your needs? Or would demolishing an existing home and building a new home in its place accomplish your goals?

If you are looking at buying a new property, where do you want to live? How would your commute to work and the schools be different in a new location? Where is your ideal location? Is it in Kahala, Kailua, Hawaii Kai or elsewhere? How much are you willing to pay for the investment and how long are you able to wait for it to yield a positive return?

These are but a few of the questions to ask. Certainly, you have a lot more that need to be answered before you finally say yes to either buying or building a house in Hawaii.

Will buying address your needs?

The housing boom in the 1950s and 1960s, expensive land and materials, consistent heat, moisture, and salty ocean air all intertwine to make Hawaii a difficult housing market. Though the average age of houses in Hawaii is not very old compared to many states in the US, the size and condition of these houses does not compare favorably. Perhaps due to moderate temperatures and expensive materials, the majority of homes built in the 1950s and 1960s were not built as robustly as homes in colder climates. Also, limited, expensive land often means these homes are smaller in size than the national average. In addition, years of damp weather and salt air has worn many of these houses down to the point where they are in tear down or complete remodel condition. It’s important to keep in mind that even houses that are 10 to 15 years old can require significant renovation or remodeling due to climate. With that in mind, buying can satisfy short term needs, but the price you are willing to pay should take into account the future costs of extensive renovation or remodeling.

Be aware of issues you can face when looking for land

Some of the best land in Hawaii has already been built on. With this in mind, vacant land that becomes available may involve a deposit up front and long waits in development before you are actually able to build. An important question here is how long are you able to wait in your current housing situation? Another consideration is that the location of the newly available land may not be easy to build on, or as central as you would like.

Explore possibilities for remodeling or demolishing an existing home.

If you already own or are looking at an existing home in Hawaii and you feel your goals can be accomplished with some remodeling or renovating, then go for it! With this route, it’s important to consider how much you want to change about the house, what your budget is, and what unknown variables you are likely to encounter. For example, if you’re counting on only modifying part of the plumbing or electrical for your house and leaving the rest untouched, keep in mind that if a licensed electrician or plumber sees existing conditions that do not meet building codes you could face additional costs to remedy the situation.

How to design for the house you want and can afford

Having a budget in mind from the beginning will make the whole process easier. If you are not upfront or completely honest with your designer or architect from the beginning, the final plans may have everything you want in a house but you may not be able to afford to build it! Know your budget, and ask about what other similar projects cost to build to get a perspective on whether your expectations are reasonable for what you want. This is the single best way to save you headaches and lots of time on your way to accomplishing your goals.

Ask about cost standards

While Hawaii’s beauty and remoteness make it an attractive destination, its isolation makes it among the most expensive place to build in the country. Watching remodeling and house flipping TV shows from the mainland make construction seem quick, easy and inexpensive. Unfortunately, the prices discussed in those shows do not translate in Hawaii. About 10 years ago the typical going rate for a new home was around $250 per square foot. A more up to date figure would be in the neighborhood of $300 to $400 per square foot.

So does this mean building is better than buying a house in Hawaii?

It really depends on your objective and budget. Our aim is to work with you to reach your goals in whatever way we can. Building new may be the perfect way to start fresh and get exactly what you want, then again buying an existing home and repairing or remodeling it may make the most sense for you. Whatever the case, please feel free to reach out to us to talk about your goals and situation and let us be a part of creating the right solution for you. We’re very proud that we’ve been consistently recognized over the years as one of Hawaii’s best home builders, and we hope you’ll contact us at your convenience and let us know how we can help.


Dealing With Termite Problems: A Few Rules To Live By | Barker Kapelle Construction LLC

Termite damage is one of the most dreaded forms of damage in homes these days. This is particularly so if you have a home that is mainly composed of wood as the supporting structure material. In such cases, the presence of termites could lead to damage to the wood, which in turn means that you are likely to have to spend a lot of time and money reversing the damage. This is especially so if it turns out that you need to either sell the home or want to make it safer.

One of the common problems associated with leaving a termite problem unattended to for a very long time include the risk of having a main structure collapsing. The presence of a termite problem could also lead to a difficulty in having the house insured at a cheap price. Most home inspectors will specifically look out for such issues when trying to figure out how much to charge you when you decide to get insurance or a mortgage on the house.

The common problems associated with fixing termite infestations


For many people, getting rid of a termite problem is a major issue simply because they do not approach it in the right manner. One of the major reasons for this includes the fact that when you get a termite infestation, you are likely to miss out on a couple of important points. For instance, you might see one termite mound, but then miss out on the fact that there might be many other unseen ones in the area. If you focus on removing that one mound, you will still end up having a problem in future. In addition to that, another common problem most people face is using the wrong technique in removing the termites. This will definitely lead to a recurrence of the problem after a short time.

For these reasons and more, it’s usually important that you leave the work of getting rid of termites to the professionals. There are quite a number of Hawaii home builders that provide termite repair services, and choosing the best of them will reduce the risk of problems arising. The only thing you have to remember is that for this to work, you will need to get the help of a professional who has a lot of experience in this field.

The professional approach to termite repair

The first and most critical step in termite repair is identifying the scope of the problem. Once you suspect or have identified that there is a termite problem in your home, you should call in a contractor to come and check it out for you. Checking the entire facility for termite infestation is a painstaking activity, but it has to be done carefully lest the whole project will be scuttled. Some of the things that the contractor is likely to look for include how many termite mounds there and how deep they are as well.

In addition to that, it will also be necessary to evaluate the degree of damage that the termites have done so far. Remember that the process of termite repair is not only about getting rid of the termites, but also repairing the damage that they have done as well. Any beams or wooden structures that will have been affected by the presence of the termites will need to be gotten rid of or repaired in some way in order to make the whole structure much safer.

How long will it take?

A common question among people trying to solve such problems is how long it will take to completely eradicate it. There are several factors that will affect the rate at which the work can be done. The most important is the type of contractor you work with. Contractors who have had a lot of experience in sorting out such issues tend to work in a more or less instinctive manner, and this in turn means that they are likely to help you out a lot as far as working fast is concerned.

The other factor that will obviously influence the rate at which the work can be done is the degree of the problem. The termite infestations that are extensive will need more careful analysis and planning in order to get rid of them completely.

It’s not always a good idea to rush through the process of getting rid of the termites and their effects, particularly if the person doing it is not very good at it. This might have the effect of increasing the failure rate and total cost of the entire project.

In summary, whenever you notice that your home has a problem with termites, you should keep the above in mind when planning on how to get rid of them. The most important thing to remember is to always consult termite repair professionals so that they can protect your home structure for years to come.


A Look At The Technical Aspects Of Painting A Room | Barker Kapelle Construction LLC

One of the cardinal steps in designing a room is painting its walls. How you go about doing it will affect many things, the most important of which is how it will end up looking. It’s therefore very important to do as much as you can to ensure that the paint job given to any room in your house is of the highest quality possible. This is usually only achievable when you understand the technical issues that surround a house painting project. Most people assume that in order to paint a wall well, you only need to get a brush or a roller and get to work. However, a poorly done job will be evident even to the untrained eye, and is something that you should avoid as much as possible.

The consequences of not painting a wall right


There are a number of things that might go wrong when a wall in your house is not painted correctly. The most common of these is uneven color tone. You are likely to find that some shades of the paint will be lighter than the others, and this is usually down to how the paint is applied on the walls. This will make the room look odd at best.

Other problems that might arise include finding that the painting is not as even as possible. You may have numerous streaks in the paint, and this will then lead to poor aesthetic quality as well. Other less common problems include finding that the paint does not dry as fast as it should, as well as getting a color tone that is not exactly what you had expected when you chose the specific paint.

Preparing the walls

One of the first critical steps in painting a wall is preparing it by cleaning it. You need to get rid of all forms of grime and dust on it. The method you use will depend on the nature of the surface. For instance, if you are going to paint on a concrete wall, you could use a wet sponge to try and get rid of all the residue on it.

In addition to that, you should also consider removing the paint that is already present. It only makes sense that if you are going to repaint a wall, you should not do it with the original paint in place. However, simply stripping the wall of paint is not enough; this should be carried out in an even manner. In many cases, it’s also necessary to smoothen the surface of the wall before painting on it. This is done using sandpaper. The goal is to ensure that the wall will be as flat as possible by the time you start painting on it. Another technical issue you have to address is to ensure that the wall is as dry as possible. This is a major concern when you are going to paint a new wall, in which case the presence of too much moisture means that it may be difficult for the paint to adhere to the surface of the wall.

Your paint choices

In addition to proper preparation, it’s also critical that you choose paints wisely. Some of the factors that determine which paint to choose include the application you have for it as well as the effect that you are going for. For instance, if you are going to have young kids in the house, you can expect that at some point in time, they will make the walls dirty by staining them using food or pens. If you want to have an easy time cleaning the walls, you will need to get a paint that has been designed with this in mind. Getting oil based paints is usually the way to go.

You should especially pay attention to issues to do with the color tone of the paint you choose. When choosing a specific color for the walls, you should take into account factors such as what kind of light will be coming into the room, as well as which direction it will be coming from. For instance, if you are going to have very large windows in the living room and you want to make it look lighter, you could consider getting paint hues that have a lighter tone than usual. However, when you want to mute too much natural sunlight, you could choose darker tones instead.

As you can see, there are many technical issues surrounding the decisions to paint a home. It’s important that you get the help of general contractors in Hawaii when doing it, so that you don’t end up having a hard time making the right choice. Doing this will not only help you get the effects you desire, but will also reduce how much it will cost you to get perfection as well.


The Cardinal Points Of Doing Eco Friendly Building Construction | Barker Kapelle Construction LLC

When you are trying to do any type of construction, one of the major concerns you might have is how to ensure that it’s as green as possible. This is something that has become very popular of late, and has also become very necessary as well. There are a number of benefits associated with doing house construction with this in mind. For one, the fact that it would be green means that you have the opportunity to save on energy.

Most of the time, green home construction also means doing it in such a manner that the entire facility will be very energy efficient. In addition to that, you also get to benefit from the fact that green building construction has a lot of public appeal. You can use it as one of your marketing points, especially if you are going to rent out the property or use it for other commercial purposes.

If you are trying to keep the environment in mind when designing and building such a structure, there are several points that you should always keep in mind. The most important of these include:

It’s important to ensure that all aspects of construction are green

If you are going to put up a structure, you should make sure that all the aspects of construction are actually going to be as green as possible. One of the classical mistakes many people make is designing an ordinary structure, and then trying to find ways of making it green once it’s up. Though this might work, it will not yield results that are as good as when you do the design from the ground up with greenness in mind. There are many eco-friendly ways of constructing a house.

For instance, if you live in the tropics, you might be worried about how to keep the structure cool without having to spend so much money on air conditioning. During the design phase, you can have the house oriented in such a manner that most of the energy from the sun will be away from the building for most of the day.


The use of green building materials

It’s also a good idea to ensure that as much of the building material as possible should be green. For instance, if you are going to construct a structure that has a lot of steel in it, you could opt to get steel from firms that recycle it rather than from the ones that get it in other ways. This way, you can be sure that the presence of the house will have very little effect on the environment. The fact that most of the world is now looking towards making more eco-friendly decisions means that you will not have a hard time identifying such facilities. These days, virtually all the material used in house construction will be recycled.

Consider the ancillaries

Perhaps you have come up with an excellent building design idea that will reduce the energy consumption of the facility. However, have you looked at the process of building it and how it will affect the environment? For instance, are you going to use a contractor who has trucks that are not well maintained, and which therefore pollute the environment too much? Will they run the trucks for much longer than is necessary, thus wasting too much energy and polluting the environment in the process? These are issues that you also need to consider when planning on the construction. If items such as the vehicles and machinery used in the construction are not well maintained, they are likely to more or less offset the steps you have made to try and be gentle on the environment.

The only way for you to avoid this is by consulting design build companies in Oahu that have a lot of experience in the matter. Working with a company who has the same vision as you do regarding protecting the environment will result in less damage to the environment during the construction process. Thankfully, there are many such firms that are now cropping up these days, so it shouldn’t be very difficult for you to find at least one that you can work with.

In summary, there are many things you can do to protect the environment during building construction. The most important thing to remember is that you have to actively participate try to do so, and that this should be the plan from the word go. Keeping this in mind by the time you start the construction process will yield the best results.

All in all, it is a noble thing to try and protect the environment when doing construction. As long as you keep the above in mind, you should be able to pull it off with relative ease. It is also likely to make it cheaper for you to maintain and run the building.


A Conventional Technique For Refinishing Wood Flooring In Old Homes | Barker Kapelle Construction LLC

There are a number of things that can be done to help retain the original wood floor looks where old home flooring is concerned. Grooves, scratches, lines and lines that form over time on the floor show a rich and full history where these floors are concerned. These all add up to the history narration of these homes. But though they are all a great mark of character, most homeowners see these floor mismatches as great eyesores. As a result, they are forever looking for the right ways to have them removed from their floors.

However, there is a crop of homeowners that truly love their old houses just the way they are and are prepared to do all it takes to retain the original character of the flooring – scratches, lines, groves and the likes all included. How is this possible? Well, read on to find out.

Opt for the traditional ways of caring for old wood floors


Scraping and then cleaning the floors by hand is one of the most effective ways to care and maintain an old style type of wood flooring. While it is a labor-intensive and time-consuming task, it offers a great sense of satisfaction that no power or automatic sanders can possibly match. Apart from this, a homeowner is able to know every part of the flooring in a better way than if it is done through the help of automated or power equipments. Simply put, he is able to discover every new mark on the floor that makes up the home’s unique old style character.

Wood floors: Hand-scraping preparations

Hand-scraping is certainly a labor of love. As such, a home owner might want to make the work simpler by having the right kinds of maintenance tools in his hands. These tools includes

A sturdy scraper with a sharp blade

This is the recommended tools where old homes wooden floor care and maintenance is concerned. It comes equipped with a sturdy handle so as to help apply more pressure to stubborn sections of the floor. Quite a few of floor scrapers have two handles to make work easier on the users back. If the homeowner does not already have one, now is the right time to invest in a good scrapper. For the best of results, it is recommended to have a number of extra blades. Any of these can be obtained in an antique goods auction, good antique stores or specialty shops. If it becomes difficult to get a hand scrapper, then a small orbital mechanical sander can be opted for.

Knee and hands protectors

When scrapping old style home floors, the homeowner will also require some kind of knee protection. Why, you might ask. Crawling all over the place in the name of floor refinishing can be really tough on the knees. It is also recommended to have a number of hardy gloves so as to help protect the hands.

And once the scraping work is done away with, the floor needs also to be varnished. The right kind of drying oil can also be applied instead of a varnish. Whichever between these tools is opted for, a soft applicator should be used to apply the varnish or drying oils. Finish the process by waxing the floor.

Wood floor hand-scraping process steps

Cleaning the wood

Start by thoroughly mopping the floor, if necessary using a small kind of hand mop for best of the results. Let the floor naturally and completely dry.

Start scraping the floor from one corner to the next

Once the floor is completely devoid of water, it is time to start the scraping. The scraping process should be started from corner. This should be done in line with the boards and not against the grains as doing simply destroys the wood. Note that some old wood floors have very thin layers in some places, meaning that the scraping needs to be very light. The landscape of the floor should be leant as work progresses. This simply implies taking time in the whole process. Hand-scraping a wood floor in an old house should never be rushed.

As the floor is being scraped, the homeowner will notice fluffy piles of old furnishing and wood building up beneath his scraping knife. If the scarping becomes extra hard in some places, then probably it is the best time to change blades. The scraping blade should scrape with each pass and not slide through it. If no more varnish or wood piles are noticed, then it means that the homeowner is through with the whole scraping undertaking. The whole scraping process should then be started all over again but on the next row of boards until the entire room’s floor surface is passed through.

Once the scraping process is over, it is time to once again clean up the floor. While at it, all debris needs also to be removed. Once done, a first coat of either drying oils or varnish should be applied. A second coat of the same varnish or drying oils should then be applied after at least 24 hours have passed. After passage of another twenty four hours, the right coat of wax should then be applied. After the waxing step is completed, then can the old home floor be said to be fully refurnished.


Top 5 Tips For Avoiding Old House Renovation Mistakes | Barker Kapelle Construction LLC

It doesn’t matter how beautiful or charming your aging home, a time will certainly come when the old house will need to be upgraded. This however doesn’t mean pulling down the whole structure of the old house in the name of restoration. While most people opt to affectionately restore their homes and keep as much of its unique character as intact as possible, sometimes they are forced to upgrade the place so as to meet the modern day requirements.

Renovating an old home takes a lot of careful consideration and serious planning. Unfortunately, most of their owners jump into an all-out restoration undertaking without having any clue as to what they are up against or getting themselves into. Old home restoration blunders can turn an expensive venture into an overly costly one. Let’s look at some of the best ways to avoid old house restoration mistakes.

Have a proper budget


To be honest, home restoration is an expensive venture. Even with the many old house restoration tasks that a homeowner may opt to handle himself, there is still plenty of things that are best left to the capable s hands of a professional renovator. Besides it is almost impossible to get the exact kinds of flooring materials or patterns, trim or wood that is needed to keep the original appearance. That said, creating a home restoration budget prior to commencement of the job at hand is a good way to get started.

You might want to add 10% for additional work or job surprises when planning out the budget. Perhaps you might also want to add another 10-15% to the overall total to cater for things that often crop up when it comes to getting the right hardware or restoration fit. This include finding the perfect window locks, lighting fixtures, plumbing system, and the likes.

Expect a remediation

Expect remediation of dangers that are likely to be a part of your home restoration project, in particular for old homes that were constructed before 1978.These homes may have lead paint or asbestos as a major part of their built up. Paints with lead as an ingredient was quite common in homes that were built from the 1880s to the late 1920s, while the use of asbestos was widely accepted between the 1950s to the 1980s that are in need of restoration today. These all lead to serious health issues that need to be looked at before the restoration a home that was built in this era. That said, plan accordingly for these kinds of issues and have the right experts to handle the home’s restoration undertaking.

Have a proper plan

To assure success in old home restoration projects, the building owner must have a proper plan. Haphazardly planning almost always end up causing more problems than the homeowner could handle. When a restoration project is being planned, one kind of repairs or another will probably also need to be catered for.

For example, it can be a difficult thing to focus on finding the right flooring restorations when the home’s owner has just discovered a termite invasion somewhere else in the house, for example under the porch. In simple terms, start by planning out the renovation project before its commencement. Once this is done, let the renovating expert go with this plan. And while at it, plan or have a separate budget for each of the renovation undertakings at your place.

Repair rather than do a complete restoration

Although some contractors encourage old home owners to replace a number of items in the home rather repair them, it is always a great idea to repair these instead of replacing them. While repairing a custom-made door, window or old mantel might not be an easy thing, where old home restorations are concerned, it is better to repair these rather than wholly replacing them.

These items are of historical importance as they uniquely speak of the old house in a manner that modern objects can never. However, if an object is beyond repair, it is recommended to employ the services of a professional craftsman to help create replicate objects that look like the original ones.

Record all that is being done

Most homeowners do not document work being done in their homes, in particular where restoration projects are concerned. Where old house restorations are concerned, it is recommended that you take pictures of everything that is being done, in particular when walls are being opened up as these will never be same again after they are restored. And while at it, request the renovator to record their thoughts in regard to the old house. These records will be of a great help when asking for tax credits. Not only this, they also offer you something that can be passed on through generations.

While some of the restoration steps might not have any positive effects on the project’s costs, they can significantly simplify things for all. Through them, a homeowner is able to evaluate where his money will be going and the reasons behind it. You will then able to stay within the budget, something that is a great thing where old home renovation undertakings are concerned.